Well, I was wrong.
You don't have a single 1gb stick of 400 / 533.
You have two 512MB sticks at 666.
Quote:
General Information :
A0 (RAS 0) : 512 (Single Bank)
A1 (RAS 2) : 512 (Single Bank)
Information SPD EEPROM (A0) :
Manufacturer : Nanya Technology
Part Number : M2Y51264TU88A4B-3C
Serial Number : 46371B41
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 512 MB (1 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 2 of 2007
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Information SPD EEPROM (A1) :
Manufacturer : Hyundai Electronics
Part Number : HYMP564U64CP8-Y5
Serial Number : 04008222
Type : DDR2-SDRAM PC2-5300 (333 MHz) - [DDR2-666]
Format : Regular UDIMM (133.35 x 3)
Size : 512 MB (1 ranks, 4 banks)
Module Buffered : No
Module Registered : No
Module SLi Ready (EPP) : No
Width : 64-bit
Error Correction Capability : No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refresh
Voltage : SSTL 1.8v
Prefetch Buffer : 4-bit
Manufacture : Week 24 of 2007
Supported Frequencies : 200 MHz, 266 MHz, 333 MHz
CAS Latency (tCL) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS to CAS (tRCD) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
RAS Precharge (tRP) : 3 clocks @200 MHz, 4 clocks @266 MHz, 5 clocks @333 MHz
Cycle Time (tRAS) : 9 clocks @200 MHz, 12 clocks @266 MHz, 15 clocks @333 MHz
Min TRC : 12 clocks @200 MHz, 16 clocks @266 MHz, 20 clocks @333 MHz
Memory Controller Information :
Memory Controller : Standard, EDO
Number of connectors : 2
Max. Module Size : 32 MB
Max. Memory Size : 64 MB
Supported Speed : 70ns, 60ns
Supported Voltages : 5v
Error Detection Method : No
Error Correction Capability : None
Current/Supported Interleave : 4-way/1-way
|
Oops.
To be honest I don't have a clue what half of that stuff means, if you're interested im sure someone else can go through it with you.
The stuff in red is your memeory type and size, which confuses me, because from what I saw on the tinterweb your PC supports max 533, yet someone decided to put 666 in there anyway.
You could buy 666, theres nothing stopping it working, but it'd probably cost more and it would work just as well as the link i showed you a few posts ago.